Care Tips of Painting for Sale

Periodic and thorough washing of the car is one of the most effective ways to keep the resale value of the car, enjoy the aesthetic pleasure of seeing your car bright for most fans, and also avoid the headaches of premature pitting or damage veneers.

However, each person has a unique way of caring for your car, with some myths and techniques, some effective and some not. The Center for Research and Road Safety Argentina (Cesvi) produced a report in which he develops a set of recommendations and tips to preserve the cars.
Cesvi has an authoritative voice on the subject since the investigations carried out daily ranging from security test more complex maintenance and repair of vehicles.
If the vehicle's paint is in good condition, no scratches or imperfections, normal maintenance is a corresponding periodic washing and polishing. The report also warns not to over polishing year.

Tips Paint protection are:
The periodic washing must be done with water and car shampoo. You need to use a brush or sponge that comes specially designed for this work with the option of attaching a hose to the continuous flow of water. The use of other elements, such as rags or sponges inadequate, could retain the land and cause an abrasive effect on the paint, scratching it.
Never wash your car with household detergents or other solvents, as these contain chemicals that deteriorate prematurely painting.

Once the vehicle is clean and dry, you can apply polishes and protectors. These should be placed at least four times a year, especially in spring, when biological factors become more noticeable. Brighteners are commonly used to enhance the shine and then a layer of protective wax for preservation.
In those cases where they are deep scratches, polishing products exist (polishing pastes) which are applied sequentially, coarse to fine-textured, with the aid of machines. This process should be repeated many times because the top layer wears paint (lacquer or enamel color). Do no more than once a year.

As a complement to perform polishing work should have a machine and two disk types, one type "lamb" for polished with coarse grains and other foam type for fine-grained applications. Then they must apply the polish and hand guards for polished finish.
All processes of washing, polishing and buffing should be carried out away from sunlight because the sheet is heated to accelerate the drying of the products used, which makes their removal and affect the final result of the work and can leave white streaks.

Before traveling to areas close to the sea is important to prepare the vehicle and protective waxes that salinity does not affect air painting. In case you can not do on his return not forget to polish the paint to remove this element and prevent causes pitting in the paint.
One thing to bear in mind is that if the vehicle is dark need more care to have him as scratches, abuse and paint defects are noted more.

The best washing
The vehicle washing technique is recommended:
1 - wet the car.
2 - Wash first tire and inner fenders because how are you parts are those with greater contact with the road, usually are dirtier areas. If washing after the body could be dusty and dirty parts and washed.
3 - Wash the vehicle body from top to bottom using a wet sponge or brush with water, along with the appropriate shampoo, making sure that you are always well embedded to reduce friction.
4 - Rinse and brush the surface with clean water.
5 - Dry with clean cotton rags and drained.
6 - Apply the polish manually with the help of a dry cloth.
7 - Allow to dry the layer of product applied.
8 - Review firmly with the aid of a clean and dry flannel.

Share this post